Certification   Membership    Education/Training    Contact Us 
 
Home
What's New
Certification
Membership
Education/Training		  
 

Customized Corporate
  Training & Testing
Certification Review
   & Training
Technical White Papers
Just for Fun Teasers
E-Learning
 Log-In Now
 Learn on Demand
   -  Members Only
Learn on Demand
coming soon
Conference Programs

  
Accredited Instructor
Discussion Board
Fluid Power Journal
 About the IFPS
 pdf Downloads
 Search
Feedback
 IFPS Store
Links		  
 

Fluid Power Teasers
All material as well as the opinions expressed are those of the respective author's and do not necessarily reflect the opinions of the International Fluid Power Society. 

Pneumatic compressor problem 

A machine shop is using a compressor that has an output of 1300-CFM.  A maximum facility demand of 1500-CFM is needed for 20-seconds.  The initial working pressure is 90-psi.   The circuit pressure cannot drop blow 60-psi.   Please size the receiver that is needed for this application?

V= receiver size in cfm
T = time in sec
Qin = flow rate in
 		 Qout = flow rate out
Pa= atmospheric pressure
P1 = initial working pressure
P2 = finial working pressure
Thank you,

Professor P.V.Btfsplk

 
Certification   Membership    Education/Training    Contact Us 

The Fluid Power Society
 Advancing the Careers of Fluid Power and Motion Control Professionals

Physical Address
1930 E. Marlton Pike A-2
Cherry Hill, NJ 08003		 Mailing Address
P.O. Box 1420
Cherry Hill, NJ 08034 		Phone: 800-303-8520
Fax: 856-424-9248
E-Mail: info@ifps.org

Groot WEB Services Disclaimer and Copyright  Privacy Policy © 1995-2005 The Fluid Power Society